Everybody takes the general knowledge test, no matter what class or endorsements you want. It covers safe driving, managing space, cargo and weight, hazards and emergencies, hours of service, and the basic CDL rules.
These 15 questions are pulled from all of that. It's the biggest test, so the more you practice, the better.
-
Question 1 of 15
A CDL driver commits a first railroad-highway grade crossing violation while operating a CMV. What disqualification period applies?
Show answerHide answer
Answer: A. At least 60 days
A first railroad-highway grade crossing violation while operating a CMV results in a disqualification of at least 60 days.
-
Question 2 of 15
What does an "E" restriction on a CDL indicate?
Show answerHide answer
Answer: B. The driver may not operate a manual transmission CMV
An "E" restriction means the driver may not operate a CMV with a manual transmission. It is typically applied when the skills test was taken in a vehicle with an automatic transmission.
-
Question 3 of 15
Which action would be considered falsifying a log?
Show answerHide answer
Answer: C. Recording driving time as off duty to hide an hours-of-service violation
Recording driving time as off duty to hide a violation is falsifying a log. Logs must accurately show the driver's true duty status. Proper corrections and annotations are allowed and expected.
-
Question 4 of 15
Why should a driver avoid sudden steering movements in a CMV?
Show answerHide answer
Answer: B. They can cause loss of control or a rollover
Sudden steering movements can make a CMV unstable, especially at higher speeds or with a high center of gravity. Smooth steering helps maintain control.
-
Question 5 of 15
A driver finds cargo stacked high, shifted to one side, and several restraints loose during a load check. What is the correct decision?
Show answerHide answer
Answer: A. Correct the load balance and securement before continuing , all three problems combine to make rollover highly likely
High cargo (high CoG) + shifted to one side (uneven weight) + loose restraints (can shift more) = the classic rollover setup. Any curve, ramp, or evasive maneuver could trigger a rollover. Re-secure before continuing , there is no safe way to operate this load as found.
-
Question 6 of 15
A driver feels the vehicle begin to hydroplane. What should the driver do?
Show answerHide answer
Answer: B. Ease off the accelerator and avoid sudden steering or braking
If hydroplaning begins, the driver should ease off the accelerator and avoid sudden steering or braking. Smooth control helps the tires regain contact with the road.
-
Question 7 of 15
When choosing a gear for a downgrade, what is a useful rule of thumb?
Show answerHide answer
Answer: C. Use a gear lower than the one you would use to climb the same grade
A useful rule of thumb is to choose a low enough gear before the downgrade to control speed without excessive service brake use. Some grades may require a lower gear than the one used to climb the same hill. Always follow road signs, vehicle guidance, and conditions.
-
Question 8 of 15
Under the bridge formula, how does axle spacing affect legal weight?
Show answerHide answer
Answer: B. Greater axle spacing generally allows greater weight; closer spacing means lower allowed weight
Greater axle spacing generally allows greater legal weight because the load is spread over more of a bridge at once. Closer axle spacing concentrates weight on a smaller bridge section, requiring lower limits to protect the structure.
-
Question 9 of 15
What is the purpose of convex (spot) mirrors on a tractor?
Show answerHide answer
Answer: C. They give a wide-angle view of the trailer side and blind spots that flat mirrors can't show
Most tractors have flat main mirrors and convex spot mirrors. Convex mirrors show a wider-angle view of the trailer side and nearby blind spots, which helps during turns, lane changes, and backing. Objects in convex mirrors appear smaller and farther away than they actually are, so drivers must use them carefully.
-
Question 10 of 15
What is the federal requirement for the combined (aggregate) working load limit of all tie-downs?
Show answerHide answer
Answer: C. At least 50% of the weight of the cargo being secured
Federal regulation requires the aggregate working load limit (combined WLL of all tie-downs) to be at least 50% of the cargo weight. For 10,000 lb of cargo, total tie-down WLL must equal at least 5,000 lb. This applies regardless of how many tie-downs are used.
-
Question 11 of 15
A CMV driver needs to make a wide right turn at an intersection. Which technique is safest?
Show answerHide answer
Answer: B. Keep the rear of the vehicle close to the curb so other vehicles cannot pass on the right
When making a wide right turn, the driver should keep the rear of the vehicle close enough to the curb to prevent vehicles from squeezing in on the right. Do not swing wide to the left before starting the turn, because that can invite another vehicle into the right-side gap. Turn slowly and watch mirrors for off-tracking.
-
Question 12 of 15
A driver refuses to give electronic consent for a required full Clearinghouse query at hire. What is the most likely result?
Show answerHide answer
Answer: B. The driver may not perform safety-sensitive functions for that employer because the required query cannot be completed
A full Clearinghouse query requires the driver's specific electronic consent. If the driver refuses, the employer cannot complete the required query and may not use the driver for safety-sensitive functions.
-
Question 13 of 15
A driver commits a first major offense while operating a CMV transporting hazardous materials requiring placards. What disqualification period generally applies?
Show answerHide answer
Answer: D. At least 3 years
A first major offense while operating a CMV transporting hazardous materials that require placards generally results in a disqualification of at least 3 years.
-
Question 14 of 15
Which statement best describes when a CDL is required?
Show answerHide answer
Answer: D. When operating a vehicle that meets CMV weight, passenger, or hazardous materials requirements
A CDL is required when operating a commercial motor vehicle that meets qualifying weight thresholds, passenger-carrying rules, or hazardous materials rules.
-
Question 15 of 15
A driver has 2 hours left on the 11-hour driving limit and 1 hour left in the 14-hour window. How much legal driving time does the driver have left?
Show answerHide answer
Answer: A. 1 hour
The driver is limited by whichever clock runs out first. Although 2 hours remain on the 11-hour driving limit, only 1 hour remains in the 14-hour window.
Look at which topics you missed. Space management and stopping distance questions come up a lot, so they're worth extra time.
Once general knowledge feels solid, move on to air brakes and combination vehicles if you're going for a Class A.
Want more questions like these?
CDL Pro has 1,000 practice questions with explanations, timed practice exams, and weak-area drills.