The air brake check is on the written test and the skills test, and it's mostly about knowing a handful of numbers and doing the steps in order. Get these down and the air brakes test gets a lot easier.

Here's the whole thing.

The steps in order

  • Chock the wheels and build air pressure to governor cut-out
  • Turn off the engine and release the parking brakes
  • Static leak test: watch the gauge for one minute with the brakes released
  • Applied leak test: hold the brake pedal down firmly for one minute
  • Low air warning: pump the brakes and make sure the warning comes on before 60 psi
  • Spring brake pop-out: keep pumping and make sure the parking brake knobs pop out

Leak limits

Here are the four numbers to memorize. These are the most air you can lose in one minute:

  • Static, single vehicle: 2 psi
  • Static, combination: 3 psi
  • Applied, single vehicle: 3 psi
  • Applied, combination: 4 psi
Heads up: Easy way to remember the leak limits. Static single is 2, and every step up (combination, or applied) adds 1. So 2, 3, 3, 4.

Low air warning and spring brakes

The low air warning, a light or buzzer, has to come on before pressure drops below 60 psi. If it doesn't come on until 45 psi, it's coming on too late and the truck shouldn't move until it's fixed.

Spring brakes kick in on their own somewhere around 20 to 45 psi, depending on the vehicle. That's the failsafe. If the knobs don't pop out when pressure gets that low, report it and don't drive.

Governor and normal pressure

Normal operating pressure is about 100 to 125 psi. The governor cuts the compressor in around 100 psi and cuts it out around 125 psi.

If pressure keeps climbing past cut-out, the governor may have failed. The safety valve opens around 150 psi as backup. If you hear it popping off while pressure looks normal, the valve or the gauge is bad.

Cheat sheet

  • Static leak: 2 psi single, 3 psi combination
  • Applied leak: 3 psi single, 4 psi combination
  • Low air warning on before 60 psi
  • Spring brakes apply around 20 to 45 psi
  • Governor: cut-in about 100, cut-out about 125, safety valve about 150

Common questions

What is the max air leak on a static test?

2 psi in one minute for a single vehicle and 3 psi for a combination.

When should the low air warning come on?

Before air pressure drops below 60 psi.

At what pressure do spring brakes apply?

Somewhere around 20 to 45 psi, depending on the vehicle.

Studying for your CDL permit?

CDL Pro has 1,000 practice questions with clear explanations, so you know why every answer is right.

← Back to blog