Going down a long, steep grade is where brakes overheat and drivers lose control. The good news is the method is simple: get in a low gear before you start down, and use your brakes the right way.

Here's how to do it, and how the test asks about it.

Pick your gear before you go down

Get into the right low gear before you start down the hill. Once you're already rolling downhill, it can be hard or even impossible to shift safely.

If you see a "Trucks Use Lower Gear" sign, that's your cue to downshift before the grade.

Let the engine help

In a low gear, the engine does a lot of the braking for you. That takes the load off your service brakes and keeps them from overheating.

Controlled braking

Here's the method the manual teaches. Once you hit your safe speed, put the brakes on firmly enough to feel a real slowdown. Bring your speed down to about 5 mph below your safe speed, then let off the brakes. When you speed back up to your safe speed, do it again.

This gives the brakes time to cool off between uses instead of riding them the whole way down.

Heads up for the test: The controlled braking number is 5 mph below your safe speed. Brake down to that, release, and repeat when you're back up to safe speed.

Brake fade

Brake fade is when your brakes lose stopping power because they're too hot. It happens when you lean on the service brakes too much on a long downgrade. Low gear and controlled braking are how you prevent it.

Never coast in neutral

Coasting down a hill in neutral is dangerous. You lose the engine's braking help, and you might not be able to get it back in gear. That's a fast way to lose control.

Cheat sheet

  • Pick a low gear before you start down
  • Let the engine do some of the braking
  • Brake to about 5 mph under your safe speed, then release
  • Brake fade = brakes too hot to stop well
  • Never coast in neutral

Common questions

When should you downshift for a hill?

Before you start down. Once you're rolling downhill, shifting can be hard or impossible.

What is controlled braking on a downgrade?

Brake firmly to about 5 mph below your safe speed, release, and repeat when you're back up to safe speed.

What causes brake fade?

Overheated brakes, usually from relying too much on the service brakes on a long downgrade.

Studying for your CDL permit?

CDL Pro has 1,000 practice questions with clear explanations, so you know why every answer is right.

← Back to blog